Your shopping cart is empty!
Categories
- Automatic Charging Relay's
- Battery Switches
- Cable Products
-
Fuses & Circuit Breakers
- - Fuses
- - Fuse Holders
- - Fuse Blocks
- - Push Button Reset-Only Circuit Breakers
- - Medium Duty Circuit Breakers
- - 285-Series Circuit Breakers
- - 187-Series Circuit Breakers
- - Klixon Series Circuit Breakers
- - A-Series Circuit Breakers
- - C-Series Circuit Breakers
- - ELCI and GFCI Circuit Breakers
- - Circuit Breaker Surface Mount System
- - Circuit Breaker Blocks
- - Circuit Breaker Accessories
- Meters
- Plugs & Sockets
- Switch Panels
- Switches
Mini Add-A-Battery Kit 65A - P/N #7649
Price: $AU164.58
Qty:
- OR -
Add to Wish List
Add to Compare
Add to Compare
The ADD-A-BATTERY is as simple to operate as an ON-OFF switch, yet effectively manages the switching and charging of two batteries from a single charge source
The Add-A-Battery includes a Dual Circuit Plus™ Battery Switch and an Automatic Charging Relay. These components simplify switching and automate charging, so that all you have to do is turn the battery switch ON when you arrive and OFF when you leave.
Dual Circuit Plus™ Battery Switch
- Simplifies switching
- Isolates engine and house circuits
- Combines batteries for emergency starting
- Tin-plated copper studs for maximum conductivity and corrosion resistance
Simultaneously switches two isolated battery banks or combines battery banks to all loads
- Make before break contact design allows switching between battery banks without power interruption
| Switch Type | Dual Circuit Plus |
| Color | Red |
| Switch Positions | 4 |
| Battery Combine | Yes |
| Alternator Field Disconnect | No |
| Maximum Voltage | 32V DC |
| Continuous Rating | 300A |
| Intermittent Rating | 450A (5 min) |
| Cranking Rating 10 sec | 1000A |
| Cranking Rating 1 min | 650A |
| Battery Inputs | 2 |
| Cable Clearance For 4/0 AWG Cables | 1.12in (28.45 mm) |
| Cable Size to Meet Ratings | 4/0 AWG (120mm²) |
| Mounting Holes | Accept 1/4" (M6) Screw |
| Terminal Stud Size | 3/8" - 16 (M10) |
| Terminal Stud Torque | 120 in-lb (13.56 Nm) |
| Weight | 0.80lb (0.36 kg) |
ACR Automatic Charging Relay
- Automatically combines batteries during charging
- Isolates batteries during engine cranking and when not charging
- Shares the charge between two batteries more efficiently than a battery isolator
- Allows efficient dual battery charging without needing regulator adjustment or rewiring
The Mini Automatic Charging Relay (M-ACR) is designed to manage the charging current from alternators up to 65 Amps found on most outboards and many inboard engines.
Start Isolation (SI) protects sensitive electronics by temporarily isolating house loads from the engine circuit during engine cranking, protecting the house circuit from voltage sags and spikes.The compact design allows for three mounting styles: surface, rear, or panel mount. The M-ACR is also available as a module in a Custom 360 Panel.
Features- Senses charging on two battery banks
- Pull off and snap on insulating cover
- LED indicates ACR status
- 1 ∕4" x .032" male quick connect terminal for ground
- 7∕ 16" (11 mm) stud length to accept multiple cable terminals
- Waterproof – rated IP67 for temporary immersion
| Nominal Voltage | 12V DC 24V DC |
| Start Isolation | Yes |
| Amperage Operating Current | 90mA (Combine) 15mA (Open) |
| Continuous Rating | 65A |
| Intermittent Rating | 115A (5 min) |
| Cable Size to Meet Ratings | 6 AWG |
| Maximum Cable Size | 1/0 AWG |
| Terminal Stud Size | 1/4" - 20 (M6) |
| Terminal Stud Torque | 60 in-lb (6.78 Nm) |
| Combine 30 sec | 13.6V DC |
| Open 10 sec | 12.35V DC |
| Open 30 sec | 12.75V DC |
| Open High | 16.0V |
| Under Voltage Lockout | 9.5V |
| Weight | 0.95lb (0.43 kg) |
