Traditional Metal Dual Bank Battery Management Panel - P/N #8280

Brand: Blue Sea Systems
Product Code: 8280
Availability: In Stock

Price: $AU377.68

Qty: - OR - Add to Wish List
Add to Compare

Description Related Products (8)

Includes [3] m-Series, ON-OFF Battery Switches PN 6006
Isolates Engine circuit from House circuit
Allows independent battery control
Allows emergency cross connect between isolated battery banks
The addition an Automatic Charging Relay (ACR) automates charging two battery banks
Protects electronics from sags and spikes caused by engine cranking
Ignition protected - Safe for installation aboard gasoline-powered boats

Includes

3 x 6006 m-Series Mini On-Off Battery Switch with Knob - Red

Maximum Voltage	48V DC
Continuous Rating*	300A
Intermittent Rating**	500A (5 min)
Cranking Rating 10 sec***	1500A
Cranking Rating 1 min****	775A
Height	7.50in (190.5 mm)
Width	6.25in (158.75 mm)
Depth	2.25in (57.15 mm)
Weight	3.20lb (1.45 kg)

*The maximum current a switch is designed to conduct for an indefinite period.
**The maximum amount of current a switch is designed to carry for a minimum of a designated period of time
***Normally associated with "Cranking Current" which is the current requried by the starter circuit prior to engine starting. The cranking current varies significantly during the starting cycle. Initially there is a large surge current required to over come the inertia and compression of the engine. This surge can be two to four times the average cranking current. Once the engine is tunring there are peaks and valleys as the psitons go through the compression and exhaust cycles. The cranking current rating is used for sizing batteries, cables and battery switchs.
****The maximum amount of current a switch is designed to carry when starting an engine when the cranking period does not exceed 1 minute.